Slogan

Trusted and Reliable IP Network Partner

Ceiling Fan Pros And Cons

Ceiling Fan Pros And Cons

Guess what? The title of this article is just out-and-out misleading. The one real "con" on the subject of a ceiling fan is what it takes to get one correctly installed. Ceiling fans can be troublesome to put in for the inexperienced do-it-yourselfer. In some cases, you will want to run an electrical line to the area where the ceiling fan is to be installed. Unless you are adept at doing this type of thing, hiring a licensed, bonded and qualified electrician will more than likely save you much grief within the lengthy run.

There is additionally the minor "con" that involves the issue of periodic maintenance. Correctly installed, a ceiling fan will provide years and years of pleasant cooling and value-financial savings in your heating invoice (assuming you might have a fan that lets you reverse the blade direction). Granted, you must wipe down the blades from time to time however then, everyone has household cleaning chores to handle from time to time.

Once in a while, ceiling fans best fans get out of balance and wish minor adjustments. The most typical culprits are free screws that connect the blades to the motor housing, blades that are not at the same angle (pitch) as the rest of the blades and a blade or blades that weigh slightly more than the others.

With out going into great detail, guantee that all of the screws are tight. If they are not tighten those which have come free and run the fan. If the wobbling has stopped, your downside has been solved.

If not, use a yardstick or other straight piece of wood and place it (with the fan stopped) vertically on the outer fringe of one of many blades. Rotate the blades by hand to make sure that every blade touches the stick. If one or more do not, simply (and gently) bend the blade(s) so that their pitch matches the others and repeat the process until you are satisfied that each blade has the identical pitch. Turn the fan on again and see if you happen to've solved the problem.

If not, you've bought a weight downside (I do not necessarily imply you, personally). The burden downside is with one or more of the blades weighing slightly more than the others. This typically happens when the blades are made of natural, organic materials such as wood. Producers usually embody what are called "balancing weights" within the box with the ceiling fan. These can be used to compensate for any differentials in weight which will have resulted over time. These "balancing weights", or clips as they're sometime called, will be hooked up to the highest of the blade so that they are just about out of sight. Start with one blade by attaching the clip near the place the blade is attached to the motor. Run the fan. If the problem persists, transfer the load out towards the tip of the blade. Strive running the fan again. If the problem persists, preserve transferring the weight. If you are close to the end of the blade and still have a problem transfer to the next blade. Proceed this process until you find the one which has the load problem.

While it is a somewhat time-consuming process, it will resolve the problem when all else fails. By the best way, if the producer didn't supply any clips you'll be able to usually purchase these clips at a home heart or massive hardware store. Should you prefer, you possibly can improvise by putting a coin or different small weight on the highest of the blade and anchoring it with a small piece of electrical tape.

Just about everybody has air conditioning. Central air con is a real expense however is just about needed in areas that have to endure hot and steamy climate during the summer months. A clever transfer is to consider the ceiling fan as a substitute for air-conditioning, significantly through the evening hours. As night approaches, both turn off the air conditioning fully or at the very least turn up the thermostat a few notches. Assuming your home is comparatively airtight, the temperature ought to stay constant for no less than an hour or so. Activate the ceiling fans or if they're already on, improve the pace of the rotation. The cooling effect produced will make it feel a number of degrees cooler and can provide a breezy various to the somewhat static air-conditioned air.

The cooling impact will more than compensate for the lower in the air-con and should keep adequate cooling all through the evening hours. In the morning, whenever you really feel the temperature rising to a mildly uncomfortable stage, adjust the thermostat down just a few notches to extend the usage of the air con unit whereas leaving the ceiling fans on.

The little bit of additional effort to make these adjustments in your cooling program will quickly turn out to be a habit and can payoff by way of financial savings in utility costs. Estimates of those financial savings vary and depend on a number of factors together with the effectivity (and upkeep) of your air conditioning unit and each the standard and upkeep of your ceiling fans.

Buying high quality ceiling fans all the time pays off in the long term because of their operational effectivity and durability. On common, you possibly can expect a reduction of no less than $30 a 12 months in your utility costs by utilizing a very good plan that incorporates the tandem use of air-con, the furnace and ceiling fans.

Should you don't already have your house outfitted with ceiling fans and have determined that it is worth considering, it's a good idea to do some due diligence research. There are a large number of brands on the market and a mess of varieties, sizes and types available for each brand. A number of years ago the government established what is called the "Energy Star" program. This program has the backing of the EPA and designates particular lighting fixtures and ceiling fans as "Energy Star" qualified. You possibly can rely on getting a more energy environment friendly unit once you shop for one that has met the "Energy Star" requirements. Unfortunately, a big number of producers supply only a few "Energy Star" rated models. The great news is that the record is growing. For more information about "Energy Star", I counsel visiting energystar.gov